XTB Nanobubble Generator Consistently Generate Bubbles With No Coarse Air Bubbles

XTB Nanobubble Generator Consistently Generate Bubbles With No Coarse Air Bubbles

Robust XTB™ delivers energy savings and worry-free operation, able to handle large particles in sludge waste management

Once introduced into a DAF clarifier tank, Moleaer’s nanobubbles rise to the surface at the rate of approximately 8-12 inches per minute, creating a thick coat on the water’s surface.

The Moleaer XTB Generator was recently installed (see Picture 1) at a plastics recycling plant in Chino, California, specialized in post-consumer recycled polyolefin resins (HDPE). The company had previously employed a conventional flotation system that recirculated the water through a pressurized tank into which gas was then dissolved prior to re-entering the DAF.

moeler.jpg
Picture 1: Moleaer XTB Nanobubble Generator installed at Chino plastics recycling plant.
Source: 
Moleaer

Moleaer XTB Nanobubble Generator.jpg

Moleaer XTB Nanobubble Generator installed in-line, utilizing a much lower HP-rated recirculating pump and eliminating the need for the pressurized tank. 
Source: Moleaer

Read Full Case Study: Moleaer